SUPPORTED CAMERA MODELS

  • PanTilt: FI8608W, FI8610W, FI8619, FI8620, FI8901, FI8901W, FI8908, FI8908W, FI8910W, FI8916W, FI8918W, FI8919W, FI9816P, FI9820W, FI9821W, FI9828W, FI9831W, Foscam R2
  • OutDoor: FI8601, FI8601W, FI8602, FI8602W, FI8903, FI8903W, FI8904, FI8904W, FI8905W, FI8906W, FI9801W, FI9802W, FI9803W, FI9804W, FI9805W, FI9826W, FI9853EP, FI9900P

    • ▷ FI9801W, FI9802W, FI9803W, FI9804W, FI9805W, FI9821W, FI9826W, FI9831W is required to be updated to the latest firmware, and “Switched to MJPEG” with admin account login

  • Other: AJ-C2WA, FI8902, FI8902W, FI8907W, FI8909W, H3-186, H6-M137, JW0008, FosBaby, C1, C2

    • ▷ For FI8601, FI8602, FI8602W, FI8608W, FI8620W, FI9820W, we support only low resolution video with Pan Tilt (not support audio and other features)

  • Common: Generic

    • The following branded cameras may be compatible with Generic model (except audio)

  • EasyN: FS-618A-M136, FS-613A-M136, FS-608A-M046, FS-608A-M046, FS-608A-M101, FS-603A-M001, FS-608A-M001, FS-603A-M106, FS-608A-M106, FS-608A-M002, FS-608A-M102, FS-608A-M505, FS603A-M505, FS-603A-M405, FS-608A-M405, FS-608A-M405, FS-608A-M112, FS-618A-M046, FS-608A-M105, F-M166
  • EasySE: EasySE-B, EasySE-F
  • Apexis: APM-J010-WS, APM-J011-WS, APM-J012-WS, APM-J0111-WS, APM-J0233-WS-IR, APM-J0210-IR, APM-J601-WS-IR, APM-J602-WS-IR, APM-J018-WS, APM-J0118-WS, APM-J801-WS, APM-J802-WS

  • 7Links: PX-3309, IPC7101R

  • Agasio: A622W

  • Airsight: PTZ Outdoor, XX40A, XX34A, XX36A

  • CIPCAM: EXP-441W

  • Clairvoyant: 1002, 1060

  • CoolCam: NIP-02BGPW3A2

  • Elro: C903

  • ES(Eye Sight): ES-IP607, ES-IP611

  • Heden: VisioCam

  • Hootoo: ES-IP607, HT-IP206, HT-IP210

  • iBaby

  • Instar: IN-2530, IN-2904, IN-2905, IN-3005, IN3010IP

  • Insteon: Insteon 75790

  • Konig: cmp-nwipcam31

  • Loftek: CXS 3200

  • Novibo: SV Pan/Tilt

  • Smarthome: Wireless Security IP Camera

  • Smart Teck: ST8908W

  • Swann: ADS-440IPC

  • Tenvis: JPT3815, Mini 319, PT7131, PT7232

  • Vstarcam: F6836W

  • Wanscam: AJ-C0WA-C0D8, AJ-C2WA-C118, FR4020A2, JW0008

  • Wansview: NC540, NCB541

  • WatchBot: WatchBot Cam

  • WatchMeIp: Indoor Pro, Outdoor Pro (IR LED is not supported)

  • Winstar: KP-6705

  • Xenta: EB8918W

  • Zmodo: Pan Tilt network camera

Note

You need to make a note as follows:

  • Before you can control your camera(s) remotely over data networks, you must to setup your router to allow incoming traffic. For security reasons, routers don't normally allow external traffic into your home/office network. You should read your camera’s setup manual regarding port forwarding. For more information on port forwarding and router configuration, please see www.portforward.com
    Some ISPs can block incoming connections to well-known ports (80 and 8080 for HTTP, 20 and 21 for FTP, 25 for SMTP, 110 for POP3). If that is the case, you need to forward a non-blocked port number in the router and map it into the camera port number.

  • The quality of video display(s) shown on your device may vary according the quality of the camera(s) and the data received from them.

  • The response time of PTZ control and multiple cameras view depends on the network and/or your device itself and/or camera capability which may cause a little bit of delay in feedback.

  • Simultaneously continuous capturing videos by maximum motion detection enabled may cause increased video frame and audio delays.

  • You can find the recordings on the right hand side of the page by clicking the right mouse button on the video screen and choosing Playback option from the actions menu.

  • You can export recordings to where you want to save by clicking “Export” button at the bottom of screen, but the app can't change the default folder.

Reference

Contact Us

Please tell us the camera model which you are using if your camera isn't on the list of supported cameras. We are continually expanding the range of supported cameras.

If you have any questions or comments, or even recommendations for the new application,contact us at the email address listed in the app store.

How to Setup

Please refer to the screenshot below to get a better understanding of how to select a camera model in your setup screen. We will take you through the step by step procedure on installing the app in case you have the FI8918W Wireless IP camera.

1. Click to Add Camera

2. Camera name: Enter the name you want to assign to the camera

3. Vendor: Select camera manufacturer using scrollbar

4. Model: Select PanTilt -> FI8918W

Setup Screen Shots

5. Username: Enter the Username of the camera (case sensitive)

6. Password: Enter the Password of the camera (case sensitive)

7. IP or DDNS: Enter IP address or DDNS URL without “http://"

8. Port: Enter the Port number on which the camera is installed

9. Do the function and other options settings.