uCam4Panasonic Android

uCam4Panasonic is a MJPEG based video streaming viewer with an incredibly intuitive touch screen user interface for Panasonic network cameras. None like the ordinary IP camera applications, it not only gives the user many more options, but enables to quickly and easily add new models right after user’s request through our open architecture software.

Be able to keep an eye on your valued possessions, properties, pets, and even your children to make sure they don’t get hurt when no adults are around. uCam4Panasonic allows you to monitor anything virtually from anywhere with Wi-Fi coverage or even cellular networks.

The most spectacular cutting edge technique of this application is the open architecture client which enables the software to dynamically update on demand. What that means is that we can easily & quickly support most of the models if the cams meet our functional requirements right after some tests. New models are able to be added online right after tapping a “reload” button.

<Main Features>

- Streaming viewer for Trendnet network cameras with JPEG/MJPEG video codec.

- Unlimited number of cameras can be configured

- Direct access to video streams from networks cameras. No NVR or 3rd party server is required

- Pan and Tilt controls with overlay buttons

- Optical zooming option if the user’s camera has the optics lens.

- Re-center camera at its original center location

- Friendly navigate cameras with overlay buttons

- Compatible with Dynamic DNS services

- Take snapshots or share via email, facebook and/or twitter.

<Supported Network Cameras>

- Common: C10A, C101E, C111A, C131A, C210, C230A, HCE481A, HCM527A, HCM-531A, HCM547A, HCM715, HCM735, NP244, NS202A

- NM100: WV-NM100

- Currently supported camera models in this application are not their own manufacturers’ entire line of models and are only models that are viewable through web browser.

- Please consult tech support before you buy this app, if you have the model with H.264 or MPEG-4 video compression.

<How to Setup>  

- Select “Setup” button for Add New Camera

- Do the settings by filling out the required fields

- Camera name: Enter the name you want to assign to the camera

- Username: Enter the Username of the camera (case sensitive)

- Password: Enter the Password of the camera (case sensitive)

- Select Camera Model by a picker then back to Setup screen

- IP or DDNS: Enter IP address or DDNS URL without http://

- Port: Enter the Port number on which the camera is installed

- Function Setup: toggle Pant Tilt, Optical Zoom, 3G Notification options ON/OFF

- Do tap “save” button in the upper left side

<Note>

Before you can control your camera(s) remotely, you must to setup your router to allow incoming traffic. For security reasons, routers don't normally allow external traffic into your home/office network. You should read your camera’s setup manual regarding port forwarding. For more information on port forwarding and router configuration, please see www.portforward.com

Some ISPs can block incoming connections to well known ports (80 and 8080 for HTTP, 20 and 21 for FTP, 25 for SMTP, 110 for POP3). If that is the case, you need to forward a non blocked port number in the router and map it into the camera port number.

The quality of video display(s) shown on the iPhone/iTouch may vary according the quality of the camera(s) and the data received from them. The response time of PTZ control depends on the network and/or camera capability which may cause a little bit of delay in feedback. Please tell us the model and manufacturer of the camera in which you are using for your own benefit and for the development of UBNTEK.

If you have any questions or comments, or even recommendations for the new application, please send an email to sales@ubntek.com.

<Menu>

Allows the user to switch to previous or the next camera screen, optical Zoom-out/Zoom-in, and to Information.

Pan Left, Tilt Up, Home Position, Tilt Down, Pan Right

Saves the images into ”Save Photos” of your iPhone/iTouch’s photo Albums

Toggle icon in landscape modes: Allows the user to alternate between turning menu bars on or off